Authenticity and anti-counterfeiting
RFID labels and hard tags can be applied visibly or hidden and prove that a product is genuine. Checks happen at the machine, in the warehouse or at the customer with a smartphone.

How a reliable proof of authenticity works
Every chip carries a unique identifier (TID) fixed by the chip manufacturer. It is stored in a database together with the EPC. During a check both are compared, and check values in the chip memory can also be evaluated. Special labels destroy the chip when removed or permanently record the opening in memory. The TID check is not the only technique: depending on the chip, digital signatures can be added so that any reader can verify the data even without a database connection, or chips with cryptographic authentication can be used. In the end, the ratio of cost to benefit also decides which technique fits.
How anti-counterfeiting works in practice
The proof always works the same way: a fixed identifier in the chip, an entry in the database, a comparison. Where the check happens depends on the application: automatically in the machine, by smartphone on site or through the data carrier of the product passport. In each variant you can switch between two cases.
Isometric view in two areas. On the left the manufacturer labels a filter cartridge with an RFID label and stores the fixed chip identifier TID together with the EPC in a database. On the right an employee at the customer inserts the cartridge into a machine. The reader in the machine reads TID and EPC, R-COM Gateway compares both with the database and releases or locks the machine.
Every chip has a fixed identifier
At the manufacturer every cartridge gets an RFID label. The encoding station writes the EPC and reads the TID, which the chip maker stored permanently. R-COM Gateway stores both together in the database.
{
"Product": "FK-200",
"Serial": 5501,
"EPC": "3034F4E4E40C0E400000157D",
"TID": "E2806894000040128A31C7D5"
}Isometric view in two areas. On the left a valve block gets an NFC label with tamper evidence at the manufacturer, and R-COM Gateway stores the fixed chip identifier UID together with the serial number in a database. On the right the part reaches a customer. A service technician holds an ordinary smartphone to the label, the app reads UID, serial number and the state of the label, and R-COM Gateway compares everything with the database. In the first case the part is an original and is fitted into the unit. In the second case the removed label of a scrapped original sits on a copy. The chip has recorded the removal, the part goes to the quarantine area and the manufacturer is informed.
Every part gets an NFC label
At the manufacturer the valve block gets an NFC label with tamper evidence. The encoding station reads the fixed identifier of the chip (UID) and writes the serial number. R-COM Gateway stores both together in the database.
{
"Product": "HV-30 valve block",
"Serial": 2208,
"UID": "3B 7E A1 62 C3 5D 80",
"Label": "NFC, tamper evidence"
}Isometric view in two areas. On the left, at the steel plant, R-COM Gateway creates a product passport for a coil and links it to heat and lot from ERP and production. Quality inspection attaches the certificate and releases the passport. At the marking station the coil gets a label with QR code, Data Matrix and RFID tag. A truck takes the coil to the processor. In the first case anyone scans the QR code with a smartphone and sees the public information without logging in. In the second case a logged-in employee of the partner reads the RFID tag with a handheld and also sees heat, lot and certificate. Every scan is logged.
Every coil gets its passport
Coil C-31842 comes off the line into the coil store. R-COM Gateway creates the product passport and links it to heat and lot from ERP and production. The data stays in your systems.
{
"Coil": "C-31842",
"Product": "Hot strip S355MC",
"Heat": "S-7720",
"Lot": "L-2406",
"Status": "created"
}What it looks like in R-COM Gateway
Custom UIs are your own screens in R-COM Gateway: a map of all checks, the suspected copies for the service team, the record of every part and the release of product passports. They run on live data and your permissions. And you do not have to rely on us to build them.
Three ways to your own overview
- 01Set up by us
We build the screens to fit your process, as part of the project.
- 02Adapted by you
You change columns, filters, limits or build entirely new views yourself in the software. No waiting for a new release.
- 03Created by AI
Describe in your own words what you want to see. The AI integration in R-COM Gateway builds the dashboard from it with your live data, without a separate BI tool or extra licences.
Show all checks from the last 30 days where the TID did not match or a label had been removed, on a map by customer, with a link to the part record.
- Checks today128
- Original126
- Suspected copies2
- By smartphone41
- Original
- Suspected copy
- P-7 · HV-30 · 2208 · label removed
- L2-07 · FK-200 · 6114 · original
- M-14 · FK-200 · 5501 · TID does not match
- Issue desk · HV-30 · 2231 · original
- P-9 · HV-30 · 2190 · original
- Open cases6
- Open over 3 days4
- Oldest case9 days
| Part | Checked at | Open for | Finding | Status |
|---|---|---|---|---|
| FK-200 · 4877 | CUS-2040 · L2-04 | 9 days | TID does not match EPC | Customer contacted |
| HV-30 · 1975 | Service store | 7 days | Label removed | Part blocked |
| FK-200 · 5032 | CUS-1102 · M-16 | 5 days | Check value invalid | Return requested |
| HV-30 · 2117 | CUS-3315 · P-9 | 4 days | Label removed | Service informed |
- Product
- HV-30 valve block
- UID
- 3B 7E A1 62 C3 5D 80
- Status
- scrapped
- Checks
- 3
- CUS-3315 · unit P-7Smartphone check: label removed, part blocked, service informed
- Service · workshopremoved, scrapped as a used part
- CUS-3315 · unit P-9Smartphone check: original, fitted
- Shippingdelivered to CUS-3315
- NFC encodinglabel applied, UID and serial stored
- Label
- NFC, tamper evidence
- Serial
- 2208
- Place
- CUS-3315 · P-7
- Result
- copy
- Reported
- Service, 10:42
- Passports (30 days)412
- Released396
- In inspection14
- Blocked2
- Scans today57
- Plant: 2
- Product: hot strip
- Period: 30 days
| Coil | Heat · lot | Scans | Evidence | Status |
|---|---|---|---|---|
| C-31842 · S355MC | S-7720 · L-2406 | 2 | 2 of 2 | released |
| C-31843 · S355MC | S-7720 · L-2406 | 0 | 2 of 2 | released |
| C-31850 · S420MC | S-7724 · L-2409 | 0 | 1 of 2 | in inspection |
| C-31791 · S355MC | S-7698 · L-2391 | 12 | 2 of 2 | released |
| C-31802 · DD11 | S-7703 · L-2395 | 0 | 1 of 2 | blocked |
Bars: evidence available (certificate 3.1 and analysis) relative to what is required. Scans: all lookups, public and partner.
How we implement it
Choose the technology
NFC can be read with ordinary smartphones; UHF suits automatic checks at read points. We have experience with HF, NFC and UHF, among others in mechanical engineering, motorsport and the art trade. We show you the options, from TID checks through digital signatures to cryptographic chips, and assess them with you for security and cost.
Labels
Visible or hidden, with removal protection or tamper evidence, together with specialised label manufacturers.
Control encoding centrally
R-COM® Gateway creates encodings and print jobs and manages EPC, TID and encoding rules.
Verify
At machines that check inserted raw materials or consumables, or on the move with an app based on R-COM Mobile.
What the solution does
- TID and EPC matched against the database
- Digital signatures and cryptographic authentication, depending on the chip
- Advice on security, effort and cost for each technique
- Removal protection and tamper evidence
- Checks by smartphone via NFC
- Printers, labels and readers from one source
- Integration into production and assembly lines
Matching hardware
Software
The software behind this solution is R-COM Gateway. The platform controls readers, printers and handhelds, processes every event according to your rules and posts the result to SAP or other systems.
FAQ
Can an RFID label be copied?
The writable data can be copied, but the identifier fixed by the chip manufacturer (TID) cannot be reproduced with standard labels. That is why we always check at least the combination of TID, EPC and database entry.
Are there other methods besides the TID check?
Yes. Data on the chip can be digitally signed. The reader then detects any change, even without a connection to the database, and if the signature includes the TID, also any copy to another chip. Some HF, NFC and UHF chips also support cryptographic authentication with a secret key. These methods offer more security but cost more in chips, readers or key management. We show you the options for your technology and choose together the one where cost and benefit match.
Let's talk about your project
An initial call with a consultant who knows your industry. Phone +49 621 4108 0 · info@data-elektronik.de